Aug 06, 2023 Deixa un missatge

Basat en els factors que afecte el rendiment i manteniment de fibra òptica saltadors, allà són sis mètodes a millorar la flexibilitat i fiabilitat de fibra òptica saltador gestió: please pay atenció to el flexió radi de el saltador. Generalment parlant, fibra òptica saltadors amb diàmetres de 1.6mm i 3.0}mm can withstand a bending radius of no less than 3.5cm, and MPO fiber optic jumpers can withstand a flexió radi de no menys que 10 vegades el seu diàmetre.

Allà són sis mètodes per millorar el flexibilitat i fiabilitat de fibra òptica pegat cordó gestió basat on factors que afecte el rendiment i manteniment de fibra òptica pegat cordons:

1. Si us plau pagueu atenció a el doblegat radi de el saltador. Generalment parla, fibra òptica saltadors amb diàmetres de 1.6mm i 3.0mm can withstand a bending radius of no less than 3.5cm, and MPO fiber optic optic jumpers can withstand a bending radius of no less than 10 times his his dé diàmetre.

2. Do not pull or press the jumper. When installing the fiber optic jumper, if too much force is applied, the fiber optic jumper and its connectors at both ends will be under pressure, that may affect performance. It is worth noting that if pulling the jumper requires a lot of force, there may be some issues during it.

3. Route the jumper according to the fiber optic jumper path. If the length of the current jumper is suitable for the current APP application, this jumper can be reused. However, the jumper must be removed from the fiber optic cable rack and then re inserted according to the new path. This is a method to prevent the jumper from tying, bending, stretching, or pressing. To effectively route the jumper, the corresponding path of the jumper must be found between the two ports while avoiding jumper blockage.

4. By bundling and tying fiber optic jumpers, the panel can look beautiful, but if the fiber optic jumpers are tied tightly or together, the risk of excessive compression increases. To avoid this problem, please "loosen" the fiber optic jumpers appropriately to allow them to work freely.

5. Etiquetatge és a necessària tasca i una de la important tasques per xarxa sistema administradors. It és necessària per marca cadascuna gestió punt en la xarxa cablejat infraestructura (incloent cable panells) adequadament, so que xarxa tècnics can precisament localitzar el inici i final punts de òptica cables.

6. Check for physical damage to the jumper, including indentation caused by sudden bending of the sheath and connector damage